In addition to comments on ICB3 review page, we received a few emails from our customers asking how to program the Blendtec ICB3 Blender. It is a fairly easy process and only takes a few seconds. You really don’t need any special cables or tools either. Just follow the steps below and you will program your Blendtec to fit your specific needs in no time.
Blendtec Cycle Chart
First things first, to experiment with all 30 blending cycles you will need to download the blendtec cycle chart.
Download and print the following chart, it will help you reprogram the ghost buttons:
Step by step instruction on how to reprogram the keys on Blendtec ICB3 blender via ghost/blank buttons using the above instructions:
1. Notice the button order on the ICB3 below is as follows:
[ 1 ] [ 2 ] [ blank ] [ blank ] [ LO ] [ HI ] Ghost buttons between 1,2,LO, HI are 3 and 4. Also LO =5 & HI=P.
2. When referring to the chart translate the buttons from left to right:
[ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ P ] (reference charts button layout)
[ 1 ] [ 2 ] [ b ] [ b ] [ L ] [ H ] (your blender’s button layout)
3. Now, assuming you would like to choose the “Multipurpose” profile you will need to quickly press the following three digit code into the keypad:[ 3 ] [ P ] [ 3 ] which translates to [ first blank button ] [ HI ] [ first blank button ] or
[ b ] [ H ] [ b ]. Remember to press hard enough for the buttons to register
Here is a quick video instruction along with the full video review of Blendtec ICB Blender. Fast forward to 5m:30 sec to watch the reprogramming: