Pyle 12-Inch 1200W Subwoofers + Boss Riot 1100W Monoblock Amplifier with Wiring Kit

Was $299.95 You save $103.00!
(No reviews - Be the first to review!)
SKU: PLBN122 + R1100M + AKS8
Brand: Pyle
Condition: New
This item is currently unavailable. Notify me when it's back in stock.

The Pyle Bandpass Subwoofer is designed to blast music and look awesome doing it. The woofers are mounted in a dual-chamber enclosure, 1 sealed and 1 ported, with the sound hitting you from the port. Give them some room and you'll hear their powerful roar.

The specially treated black rubber edge suspension absorbs vibrations, so your sound is pure. The silver polypropylene cones boost your bass and extend the sub's life.The plexiglass window, blue LED rings, and 4 tuned ports give your car that extra edge.

Also included is the Boss Riot 1100W Monoblock Amplifier and 8-gauge wiring kit that delivers the jams in your ride.

As a Class A/B amplifier with a MOSFET power supply, it gives you crystal clear and crisp acoustics as you drive down the open road. It's 2-Ohm stable to produce more power and more volume and is full of features that will leave you speechless.

It shows off switchable bass boost, variable gain control, a variable low-pass filter, high and low-level inputs, thermal protection, and a subwoofer level control that gives you the ability to boost the sub level when an amp or subwoofer are connected.

  • Subwoofers
    • Pair of 12-inch high power subwoofers
    • RMS power: 1200 watts
    • Silver polypropylene cone
    • Specially treated black rubber edge suspension
    • 2-inch aluminum voice coil
    • Bandpass alignment for extra deep bass
    • Plexi glass front window
    • Blue LED woofer rings
    • 4 tuned ports
    • Dimensions: 16.8 x 31.8 x 15.6 inches
    • Warranty: 1-year warranty
    • Part number: PLBN122
  • Amplifier
    • Riot 1100W Monoblock Class A/B Amplifier with subwoofer control remote and and an 8-gauge amplifier wiring installation kit
    • MOSFET superior power supply requires less current to operate
    • 2-Ohm stable to produce more power resulting in more volume
    • Switchable bass boost allows you to boost the low bass +18 dB
    • Variable gain control lets you balance the amps output with the speakers or sub the amp is driving
    • Variable low-pass filter lets you control the frequencies that pass through the subwoofer
    • High and low level inputs provide flexibility with high-level inputs from the speakers and low-level RCA inputs accept the signal from pre-amp
    • Thermal protection circuit turns the amp off and allows it to cool down before turning it back on
    • Subwoofer level control gives you the ability to boost or attenuate the sub level when an amp and subwoofer are connected to the pre-amp output
    • Back-lit blue illuminated logo
    • Specifications:
      • Total power output: 1100 watts
      • Peak power: 1100 watts x 1 @ 2 Ohms
      • RMS power: 825 watts x 1 @ 2 Ohms
      • Peak power: 550 watts x 1 @ 4 Ohms
      • RMS power: 413 watts x 1 @ 4 Ohms
      • Signal to noise ratio: 102 dB
      • Frequency response: 9 Hz to 50 kHz 1 dB
      • Impedance: 2 to 8 Ohms
      • T.H.D: 0.01 percent
      • RCA inputs: 2-channel
      • Low-pass filter: 35 Hz to 160 Hz
      • Bass boost: Switchable to 0 or 18 dB
    • Dimensions: 9.13 x 10.44 x 2.25 inches
    • Warranty: 6-year warranty
    • Part number: R1100M
  • Wiring kit
    • 20 foot 8-gauge red power cable
    • Competition high-quality fuse holder
    • 0.25-inch gold-plated ring terminal
    • 3 foot 8-gauge black ground cable
    • Number 10 gold-plated ring terminal
    • 16 foot 18-gauge blue turn-on wire
    • 20 foot high performance RCA interconnect
    • 3 rubber grommets
    • 30 foot speaker wire
    • 0.3125-inch gold-plated ring terminal
    • 6 foot split loom tubing
    • 20, 4-inch wire ties
    • Product warranty: 1-year warranty
No reviews here yet. Be the first to write a review!
Have a question that's not answered here? Ask our team of product experts!
This will be visible to our community
We'll use this to email you a response. We won't make this public. See our Privacy Policy