MTX TNE212D 12" 1200W Dual Loaded Subwoofer Box + 1500W Amplifier + Capacitor

Was $299.99. You save $46.00!
(No reviews - Be the first to review!)
SKU:TNE212D + AR1500M + AKS8 + CPBK2
Want to know when? Enter your zip code to get your delivery date.

Includes our everyday, fast & free shipping.

The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12-inch sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. This kit comes complete with a 1500W monoblock A/B amplifier and 2-farad capacitor.

The Terminator subwoofers used in the enclosure include durable polypropylene dust caps that can survive the rigors of most trunks and are lightweight, allowing them to efficiently move using less power.

Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil and dissipate heat. The enclosure itself is made of extra-strength 5/8-inch MDF.

Have everything you need to achieve audio perfection with the included 1500-watt, Monoblock A/B amplifier and 2-farad capacitor as well.

  • Loaded subwoofer enclosure
    • 1200 watt of max power, 400 watts RMS
    • Rubber surround
    • Polypropylene cone
    • MTX audio logo on dustcap
    • 2-inch aluminum single 4 ohms voice coil
    • 48-ounce magnet
    • Final impedance: 2 ohms
    • Frequency response: 37-150 Hz
    • 5/8-inch solid MDF construction
    • Black carpeting covering the enclosure
    • Terminator logo embroidered into carpet front
    • Dimensions: 29.69 x 13.5 x 11.125 x 14 inches
    • Warranty: 1-year warranty
  • Amplifier
    • Armor 1500W Monoblock, Class A/B Amplifier with subwoofer control remote and an 8-gauge amplifier wiring installation kit
    • MOSFET superior power supply requires less current to operate
    • 2-Ohm stable to produce more power resulting in more volume
    • Switchable bass boost allows you to boost the low bass +18 dB
    • Variable gain control lets you balance the amps output with the speakers or sub the amp is driving
    • Variable low-pass filter lets you control the frequencies that pass through the subwoofer
    • High and low level inputs provide flexibility with high-level inputs from the speakers and low-level RCA inputs accept the signal from pre-amp
    • Thermal protection circuit turns the amp off and allows it to cool down before turning it back on
    • Subwoofer level control gives you the ability to boost or attenuate the sub level when an amp and subwoofer are connected to the pre-amp output
    • Specifications:
    • Power handling:
    • Total power output: 1500 watts
    • Peak power: 1500 watts x 1 @ 2 Ohms
    • RMS power: 1125 watts x 1 @ 2 Ohms
    • Peak power: 750 watts x 1 @ 4 Ohms
    • RMS power: 563 watts x 1 @ 4 Ohms
    • Signal to noise ratio: 105 dB
    • Frequency response: 9 Hz to 50 kHz 1 dB
    • Impedance: 2 to 8 Ohms
    • T.H.D: 0.01 percent
    • RCA inputs: 2-channel
    • Low-pass filter: 35 Hz to 160 Hz
    • Bass boost: Switchable to 0 or 18 dB
    • Dimensions: 10.31 x 6.5 x 2.56 inches
    • Warranty: 1-year warranty
  • Capacitor
    • Digital Voltage Display
    • Remote terminal screw
    • Capacitance: 2-farad, 2 million microfarad
    • High-level input voltage: 20
    • Low ESR
    • Finish color: Black
    • Warranty: 1-year warranty
No reviews here yet. Be the first to write a review!