Electronics > Vehicle Electronics > Car & Motorcycle Electronics > Subwoofer Enclosures > Kicker 40DCWS102 + R500X1D + VM-SRSK4B

Kicker 10-inch 1200W Dual Loaded Sub Enclosure + 500W Amplifier + Wiring Kit

$373.95
Was $499.95 You save $126.00!
(No reviews - Be the first to review!)
SKU: 40DCWS102 + R500X1D + VM-SRSK4B
Brand: Kicker
Condition: New
This item is currently unavailable. Notify me when it's back in stock.

Pump up your car audio with subwoofers that come locked, loaded, and ready to go in a high-quality box - the Kicker 10-Inch 1200-Watt Dual Loaded Subwoofer Enclosure. This package comes complete with 500-watt amplifier and wiring installation kit so you have everything you need for audio perfection.

This loaded 10-inch subwoofer enclosure features a max power of 1200 watts and an RMS power of 600 watts. The subs feature a lightweight, injection-molded polypropylene cone and tough, ribbed polyurethane surround for eliminating flex and distortion. Equipped with rugged construction and an impressive bold look, the dual enclosure offers a pair of CompS subwoofers in a stout MDF box with rounded corners and internal bracing for additional strength and support. Slot vents help create the ultimate volume you've been looking for.

This package also includes a Rockford Fosgate Mono D amplifier with a max power output of 500 watts, and an 4-gauge wiring kit to make installation a snap.

  • Loaded Subwoofer Enclosure
    • Factory-tuned, great-value CompS subwoofers and enclosure
    • Dual-subwoofer enclosures in 2-ohm impedances
    • Sturdy MDF box with rounded corners covered in charcoal-gray carpeting
    • Peak power: 1200 watts
    • RMS power: 600 watts
    • Impedance: 2 ohms
    • Ready-made Kicker bass that installs in minutes
    • Tough, max-output vented-design boxes
    • Mounting depth: 4.8 inches
    • Type of enclosure: Ported
    • Connector type: Spring post
    • Woofer material: Polypropylene
    • Frequency response: 30-500 Hz
    • Sensitivity: 86.2 dB
    • 0.75 MDF construction
    • Dimensions: 13.44 (TD) x 16.38 (BD) x 8 x 14 inches
    • Weight: 72.55 pounds
  • Amplifier
    • Rated power: 250 watts x 1 @ 4 ohms; 500 watts x 1 @ 2 ohms
    • Dynamic power: 333 Watts x 1 @ 4 ohms 0 degree res; 647 watts x 1 @ 2 ohms 0 degree Res
    • Class D, MOSFET power supply
    • 12dB / octave Butterworth crossover
    • On-board punch EQ with + 18dB boost @ 45Hz
    • Cast aluminum heatsink
    • Over current protection
    • Short circuit protection
    • Muted turn on
    • RCA pass-thru outputs
    • High level inputs
    • 0/180-degree phase switch
    • Real time output and power supply thermal sensing
    • Remote bass control included
    • 4-gauge power/ground connectors
    • CEA-2006 compliant
    • Weight: 6 pounds
  • 4-Gauge Wiring kit
    • Complete 2-channel amplifier wiring kit with cables, connectors, and accessories
    • 4-gauge high current power and ground cables with 315 multi-stranded bare copper
    • Wire construction in a translucent blue/ black insulation jacket
    • 18-gauge remote turn-on wire with solid blue insulation jacket
    • 12-gauge high-density 2-conductor copper speaker wire with clear blue insulation jacket
    • E.M.I. isolating RCA audio cables with maximum surface contact
    • Connection and exclusive VM Audio barrel grip nickel plated, high-impact resistant 60A AGU fuse holder with exclusive 4-gauge
    • Maximum wire-to-surface current flow directivity
    • 4-gauge nickel-plated power/ ground solderless ring crimp terminals
    • 4-gauge nickel-plated power/ ground solderless spade crimp terminals
    • Element protection power cable loom jacket
    • Quick-connect nickel-plated crimp speaker wire connectors
    • High-quality insulated solderless crimp butt terminals
    • Durable high strength nylon tie wraps
    • Cable firewall black rubber grommets
No reviews here yet. Be the first to write a review!