ALL ORDERS PLACED BEFORE 2PM CST SHIP THE SAME DAY - FAST & FREE SHIPPING EVERY DAY

Polk Audio 900 Watt 5-Channel Car Amplifier, Refurbished

$204.99
Was $499.99 You save $295.00!
(No reviews - Be the first to review!)
SKU: PAD5000.5
Brand: Polk Audio
Condition: Refurbished
This item is currently unavailable. Notify me when it's back in stock.

This refurbished Polk Audio 5-Channel Amplifier is an ultra-efficient Class D car amp that's capable of bridging 2 full-range channels into a single full-range channel with a huge power output.

This little amp has an incredible sound and lots of power without the distortion. Run it for hours and it will still be cool to the touch. You'll love the sound's purity and clarity.

Wire the front channels to increase the output power from 70 watts to 200 watts per channel. Try the 4 full-range channels and a subwoofer channel or the 2 bridged full-range channel with a sub channel configuration.

Enjoy the powerful sounds that come from a sleek amp, the Polk Audio PAD5000.5

Certified Refurbished Items

This is a used item that has been professionally restored to working order by a manufacturer or manufacturer-approved vendor. This means the product will show signs of use, such as scratches and scuffs, but has been inspected and repaired to meet manufacturer specifications and is in the original working condition. This item may or may not be in the original packaging.
  • Super-efficient class D design
  • Runs very cool
  • High-speed MOSFET
  • Protection- thermal, DC offset, reverse DC voltage, and short circuit protection
  • Sub 1/ Sub 2 inputs for subwoofer signal from head unit
  • SUB/INT source switch - amplifier will filter bass frequencies from the full range signal and send them to the subwoofer amplifier channel
  • Low-pass and high-pass frequency controls enable you to adjust crossover overlap for better blending of speakers
  • Rear Full, HPF switch selects between no filtering or a high pass filter
  • Channel mode switch (4Ch/ST) - in the stereo position, the amplifier will send the same signal to front and rear channels
  • Nickel-plated wire terminals and RCA connectors for maximum signal transfer
  • Stainless steel hardware won't corrode in humid conditions
  • Specifications:
    • RMS power at 14.4V watts per channel bridged - 4 ohms: 200 x 2 watts
    • RMS power at 14.4V watts per channel NOT bridged @ 1 kHz - 2 ohms: 100 x 4 watts
    • RMS power at 14.4V watts per channel NOT bridged @ 1 kHz - 4 ohms: 70 x 4 watts
    • 12 V and ground cable gauge: 4 AWG
    • Distortion at rated power: < 0.1%
    • Power specs: 100W x 4, 400W x 1 RMS @ 2 ohms; 70W x 4, 200W x 1 RMS @ 4 ohms; 200W x 2 RMS bridged @ 4 ohms; 500W x 1 RMS @ 1 ohm (sub)
    • Maximum sensitivity: 200 mV - 6 V dB
    • Minimum impedance bridged: 4 ohms
    • Minimum impedance not bridged: 2 ohms
    • Remote gain for bass
    • Signal-to-noise: 105 dB
    • Subsonic filter
    • Total frequency response: 20 Hz - 20 kHz
    • High pass filter frequency: 40 Hz - 400 Hz (front), 40 Hz - 4 kHz (rear)
    • High pass filter slope: 12 dB/ octave
    • Low pass filter slope: 80 Hz - 4 kHz (front)/ 50 Hz - 5 k Hz (rear)
  • Dimensions: 6.75 x 13.3 x 1.75 inches
  • Weight: 6.75 pounds
  • Product warranty: 90-day warranty
No reviews here yet. Be the first to write a review!
Have a question that's not answered here? Ask our team of product experts!
This will be visible to our community
We'll use this to email you a response. We won't make this public. See our Privacy Policy