Autotek MMA1100.2 1100 Watt 2 Channel Mean Machine Car Amplifier + Wiring Kit

Was $159.99 You save $90.00!
(No reviews - Be the first to review!)
SKU: MMA1100.2 + VM-SRSK4B
Brand: Autotek
Condition: New
This item is currently unavailable. Notify me when it's back in stock.

The Mean Machine is evolving with internal improvements in circuitry and signal flow. The lineup is still the biggest power of the line Autotek line.

All Mean Machine subwoofer amplifiers Allow for complete tuning of the subwoofer system with Variable Low-Pass controls from 30-250Hz and Variable Subsonic Filter controls from 15-35Hz.

This amplifier will put out 1100 watts at 4 ohms when bridged or can do 550 watts per channel at 2 ohms. This amplifier is highly efficient and will fit into tight spaces with dimensions of 9.2" x 2.4" x 9.6".

Not only is the Shaker Series Amplifier Installation Kit a true lifesaver, but it also is designed to make your entire sound system work at peak performance. If you want your amplifier to operate at its best you simply cannot use inferior parts and accessories. Our exclusive, pre-selected set of tools includes CopperCure highly conductive copper wires that are oxygen-free to ensure clean and consistent power transfer.

These high-performance copper wires are wrapped in the durable and flexible SurfaceFlex wire jacket for effective cable routing. The CRB fuse holder has been specially plated with nickel for corrosion protection against the elements. Last but not least, distortion and external noise are reduced to a minimum with the Strand Interaction Conductor.

  • Autotek MMA1100.2 1100 Watt 2 Channel Mean Machine Car Amplifier
    • 2 Ohm: 550 Watts x 2 Channels
    • 4 Ohm: 275 Watts x 2 Channels
    • Bridged @ 4 ohm: 1100 Watts x 1 Channel
    • Frequency Response: 10Hz-45KHz
    • S/N: >05dB
    • THD%: .5%
    • Low Noise Pre-Amplifier
    • Pro- Fi™ High Speed MOSFET’s
    • Low Level RCA Inputs and Outputs
    • Line Output for Amplifier Daisy Chaining
    • Class A/B
    • Fully Adjustable Pro-Design Crossovers
    • Auto-Step PWM MOSFET Power Supply
    • Nickel-Plated Brass Screw Connections
    • Bass Thrust - Variable Bass Equalization
    • Dimensions: 9.2" x 2.4" x 9.6"
    • Authorized Autotek Dealer!
    • Part Number: MMA1100.2 (MMA11002)
    • Condition: Brand New!
  • VM Audio 4 Gauge Wiring Kit
    • Complete 2-Channel Amplifier Wiring Kit with Cables, Connectors and Accessories
    • 4-Gauge High Current Power and Ground Cables with 315 Multi-Stranded Bare Copper
    • Wire Construction In a Translucent Blue/Black Insulation Jacket
    • 18-Gauge Remote Turn-On Wire with Solid Blue Insulation Jacket
    • 12-Gauge High-Density Two-Conductor Copper Speaker Wire with Clear Blue Insulation Jacket
    • E.M.I. Isolating RCA Audio Cables with Maximum Surface Contact
    • Connection and Exclusive VM Audio Barrel Grip Nickel Plated, High Impact Resistant 60A AGU Fuse Holder with Exclusive 4-Gauge
    • Maximum Wire-To-Surface Current Flow Directivity
    • 4-Gauge Nickel Plated Power/Ground Solderless Ring Crimp Terminals
    • 4-Gauge Nickel Plated Power/Ground Solderless Spade Crimp Terminals
    • Element Protection Power Cable Loom Jacket
    • Quick-Connect Nickel-Plated Crimp Speaker Wire Connectors
    • High Quality Insulated Solderless Crimp Butt Terminals
    • Durable High Strength Nylon Tie Wraps
    • Cable Firewall Black Rubber Grommets
    • VM Audio SRSK4B 4 Gauge Ga Car Amplifier Amp Installation Wiring Wire Kit+RCA
    • Type: 2 Channel
    • Amplifiers Supported: Single Amplifier
    • Power/Ground Wire Size: 4 Gauge
    • Strand Count: 315
    • Power Wire Length: 16Ft
    • Ground Wire Length: 3Ft
    • Speaker Wire Size: 12 Gauge
    • Speaker Wire Length: 20Ft
    • Remote Wire Size: 18 Gauge
    • Remote Wire Length: 15Ft
    • RCA Cable Length: 15Ft
    • Fuse Holder: AGU
    • Fuse Size: 60A
    • Wire Ties: 20
    • Spade Connectors: 2
    • Ring Connectors: 2
    • Ring Spade Terminals: 5
    • Butt Connectors: 3
    • Split Loom Tubing: Yes
    • Screws: 3
    • Fasten Connectors: 4
    • Part Number: VM-SRSK4B (SRSK4B)
    • Condition: Brand New!
    • Authorized 1 Year VM Audio Warranty
No reviews here yet. Be the first to write a review!
Have a question that's not answered here? Ask our team of product experts!
This will be visible to our community
We'll use this to email you a response. We won't make this public. See our Privacy Policy