ALL ORDERS PLACED BEFORE 2PM CST SHIP THE SAME DAY - FAST & FREE SHIPPING EVERY DAY
Electronics > Vehicle Electronics > Car & Motorcycle Electronics > Amplifiers > 2-Channels Amplifiers > VM Audio VM-SRA500.2 + VM-SRSK4B + VM-SRCAP2.0

VM Audio SRA500.2 500W 2 Channel Amplifier with 4 Gauge Wiring Kit and 2 Farad Capacitor

$74.99
Was $172.99 You save $98.00!
(No reviews - Be the first to review!)
SKU: VM-SRA500.2 + VM-SRSK4B + VM-SRCAP2.0
Brand: VM Audio
Condition: New
This item is currently unavailable. Notify me when it's back in stock.

Increase the power of your car's audio system with this VM Audio Amplifier. This VM Audio Amplifier offers an RMS power rating of 120 watts x 2 channel at 4 Ohm and a peak power of 250 watts x 2 channel at 2 Ohm or 500 watts x 1 channel at 4 Ohm bridged. Its extremely low noise and distortion means this amplifier runs quietly and efficiently, and it offers a dedicated soft turn-on circuit.

This VM Audio amplifier offers 3-way protection circuitry (thermal, over-current and over-voltage), and it uses discrete signal processing stages. Measuring 8.66" x 9.76" x 2.4", this amplifier can fit in slim spaces.

  • Nickel Plated Brass Block Terminals
  • Discrete Signal Processing Stages
  • 1 Year Manufacturer Warranty

This complete amplifier wiring kit comes with all the cables, connectors and accessories you'll need to wire your amp easily. This amplifier wiring kit comes with 4-gauge, high-current power cables with 315 multi-stranded copper, EMI isolated RCA audio cables with maximum surface contact connect with an exclusive VM Audio barrel grip, a nickel-plated high-impact resistant 60 AGU fuse holder with exclusive 4-gauge maximum wire-to-surface current flow directivity and much more.

This amplifier wiring kit also comes with all the installation hardware you'll need to have your amp up and running in less time.

  • High quality insualted solderless crimp butt terminals
  • Element protection power cable loom jacket
  • 1 Year Manufacturer Warranty

This VM Audio 2-Farad Hybrid Digital Capacitor offers a high-strength cylindrical aluminum housing, a soft turn on/off power surge, an accurate, 3-digit voltage display and a digital over-voltage protection system. Mounting and charging accessories are included with this VM Audio digital capacitor, and this digital capacitor can handle up to 16V (with a 20V surge capacity), and this digital capacitor measures 3" x 10.24".

  • Nickel Plated Rust Resisting Post Connectors
  • Digital Over Voltage Protection System
  • 1 Year Manufacturer Warranty

VM Audio: The Passion of Sound

  • New VM Audio SRA500.2 500 Watt 2 Channel Car Amplifier
  • RMS Power Rating:
    • 120 Watt x 2 Channel @ 4 Ohm
  • Peak Power:
    • 250 Watt x 2 Channel @ 2 Ohm
    • 500 Watt x 1 Channel @ 4 Ohm Bridged
  • 500 Watt Max
  • 2/1 Channel Power Amplifier
  • Class A/B Amplifier Circuit Technology
  • Extremely Low Noise and Distortion
  • Efficient DC to DC PWM MOSFET Power Supply
  • Supreme MOSFET Output Stage
  • Power and Protect LED Indicator
  • Unbalanced Input Stage Circuitry
  • Dedicated Soft Turn On Circuit
  • Discrete Signal Processing Stages
  • Non Fading Pre Amp Stereo Outputs
  • 3 Way Protection Circuitry (Thermal, Over Current, Over Voltage)
  • Variable Input Gain Control Adjustment
  • Low/Highpass Select Crossover Filter
  • Bypass Crossover Switch
  • Continuous Variable Lowpass Crossover (50Hz-250Hz)
  • Continuos Bass Boost Adjustement (0dB-12dB)
  • Nickel Plated Brass Block Terminals
  • Frequency Response: 20Hz-20kHz
  • Signal to Noise Ratio: >105dB
  • Fuse: 30A
  • 8 Gauge Power and Ground Wiring is Recommended for Installation
  • Dimensions: 8.66"L x 9.76" W x 2.40" H
  • Product Condition: Brand New
  • Part Number: SRA500.2
  • 1 Year Manufacturer Warranty
  • New VM Audio SRSK4B 4 Gauge Amplifier Complete Wiring Kit
  • Maximum of 2000 watts
  • Complete amplifier wiring kit with cables, connectors and accessories
  • 4 Gauge high currrent power cables with 315 multi stranded bare copper
  • 4 Gauge high currrent ground cables with 315 multi stranded bare copper
  • 18 Gauge remote turn on wire with solid red insualtion jacket
  • 12 Gauge high density two conductor copper speaker wire with clear red insulation jacket
  • E.M.I isolated RCA audio cables with maximum surface contact connection and exclusive VM audio barrel grip
  • Nickel plated, high impact resistant 60 AGU fuse holder with exclusive 4 Gauge maximum wire to surface current flow directivity
  • 4 Gauge nickel plated power/ground solderless ring crimp terminals
  • 4 Gauge nickel plated power/ground solderless spade crimp terminals
  • Quick connect nickel plated crimp speaker wire connector
  • Element protection power cable loom jacket
  • High quality insualted solderless crimp butt terminals
  • Durable high strenght nylon tie wraps
  • Kit includes:
    • 16 Ft blue 4 gauge power wire
    • 3 ft silver 4 gauge ground wire
    • 15 ft high performance RCA wire
    • 4 Gauge In-line AGU fuseholder
    • 60 Amp AGU fuse
    • 15 ft 18 Gauge Remote wire
    • 20 ft 12 gauge Speaker wire
    • 20) 6" wire ties
    • 2) spade connectors
    • 2) ring connectors
    • 3) screws
    • 3) butt connectors
    • 4) fasten connectors
    • 5) spade connectors
    • Cable firewall black rubber grommets
  • Product Condition: Brand New
  • Part Number: SRSK4B
  • 1 Year Manufacturer Warranty
  • New VM Audio SRCAP2.0 2 Farad Car Hybrid Digital Capacitor
  • 2 Farad High Energy Electrolytic Capacitor
  • 2000W Stabilizing Amplifier Flow Capacity
  • High Strength Cylindrical Aluminum Housing
  • Nickel Plated Rust Resisting Post Connectors
  • Soft Turn On/Off Power Surge
  • Automatic On/Off Power Surge
  • Accurate 3 Digit Voltage Display
  • Bright Changing Status LED
  • Notification Safety Sound Alert
  • Digital Over Voltage Protection System
  • Mounting/Charging Accessories Included
  • Specifications:
    • Voltage: 16V Maximum / 20V Surge
    • Equivalent Series Resistance (ESR): <0.006 Ohm
    • Tolerance: +/- 10%
    • Charging /Discharging Resister: 1/4W / 1.2K Okm
    • Capacitor Type: Electrolytic
    • Terminals: Post Connectors
    • Dimensions:
    • Diameter: 3"
    • Length: 10.24"
  • Resistor, Mounting Brackets Included!
  • Product Condition: Brand New
  • Part Number: SRCAP2.0
  • 1 Year Manufacturer Warranty
No reviews here yet. Be the first to write a review!
Have a question that's not answered here? Ask our team of product experts!
This will be visible to our community
We'll use this to email you a response. We won't make this public. See our Privacy Policy