VM Audio 500W 2 Channel Car Amplifier

Was $83.99 You save $44.00!
(2 Reviews)
SKU: VM-SRA500.2
Brand: VM Audio
Condition: New
This item is currently unavailable. Notify me when it's back in stock.

Increase the power of your car's audio system with this VM Audio Amplifier. This VM Audio Amplifier offers an RMS power rating of 120 watts x 2 channel at 4 Ohm and a peak power of 250 watts x 2 channel at 2 Ohm or 500 watts x 1 channel at 4 Ohm bridged. Its extremely low noise and distortion means this amplifier runs quietly and efficiently, and it offers a dedicated soft turn-on circuit.

This VM Audio amplifier offers 3-way protection circuitry (thermal, over-current and over-voltage), and it uses discrete signal processing stages. Measuring 8.66" x 9.76" x 2.4", this amplifier can fit in slim spaces.

  • New VM Audio SRA500.2 500 Watt 2 Channel Car Amplifier
  • RMS Power Rating:
    • 120 Watt x 2 Channel @ 4 Ohm
  • Peak Power:
    • 250 Watt x 2 Channel @ 2 Ohm
    • 500 Watt x 1 Channel @ 4 Ohm Bridged
  • 500 Watt Max
  • 2/1 Channel Power Amplifier
  • Class A/B Amplifier Circuit Technology
  • Extremely Low Noise and Distortion
  • Efficient DC to DC PWM MOSFET Power Supply
  • Supreme MOSFET Output Stage
  • Power and Protect LED Indicator
  • Unbalanced Input Stage Circuitry
  • Dedicated Soft Turn On Circuit
  • Discrete Signal Processing Stages
  • Non Fading Pre Amp Stereo Outputs
  • 3 Way Protection Circuitry (Thermal, Over Current, Over Voltage)
  • Variable Input Gain Control Adjustment
  • Low/Highpass Select Crossover Filter
  • Bypass Crossover Switch
  • Continuous Variable Lowpass Crossover (50Hz-250Hz)
  • Continuos Bass Boost Adjustement (0dB-12dB)
  • Nickel Plated Brass Block Terminals
  • Frequency Response: 20Hz-20kHz
  • Signal to Noise Ratio: >105dB
  • Fuse: 30A
  • 8 Gauge Power and Ground Wiring is Recommended for Installation
  • Dimensions: 8.66"L x 9.76" W x 2.40" H
  • Product Condition: Brand New
  • Part Number: SRA500.2
  • 1 Year Manufacturer Warranty
Written by on Jul 29, 2013
Amped up

I donít have any subs for my car, but I wanted an amp because Iíve upgraded my car speakers and wanted to get the most out of them. I can safely say that my car audio has dramatically improved thanks to this amp and the power it added to my sound system.


Would I recommend this to a friend or family member? Yes
  • Easy to Use
  • Safe
  • Simple to Set Up
  • Looks Good
  • Sturdy
  • Quality Construction
Is this review helpful?      
Written by from Compton, California on May 15, 2015
Great Power to Value Ratio

I got this amp for a customer to replace a terrible "In-Box" amplifier, I wired it to 4 ohms un-bridged and tested the RMS using an AMM-1..i gave the rated 170  watts@ 14.4 volts and then some. The set up I put the amp on is 2 10 inch Crunch Audio subwoofers in a tiny 1.0 cu ft rattles the trunk and kicks HARD..I know for sure it'll do the advertised rating with the correct power supplu. I'll be stocking up with nothing but VM amps from now on, great value to  power ratio.. I usually only deal with Incriminator, JL , SKAR, MMATS, DC AUDIO,PPI, Orion and AQ I know real bass and this little amp can bring it, Im ordering a couple VM 2200D  for my 6 12's to replace the AQ I just blew up.

Would I recommend this to a friend or family member? Yes
  • Easy to Use
  • Safe
  • Simple to Set Up
  • Looks Good
  • Sturdy
  • Quality Construction
  • Great Value
Is this review helpful?      
Have a question that's not answered here? Ask our team of product experts!
This will be visible to our community
We'll use this to email you a response. We won't make this public. See our Privacy Policy