Audiobahn A2002J 300W 2 Channel Amplifier with 8 Gauge Amp Kit

(No reviews - Be the first to review!)
Brand: Audiobahn
Condition: New
This item is currently unavailable. Notify me when it's back in stock.

Buy with confidence, we are an authorized Audiobahn retailer!

DIGITAL DC INPUT VOLTAGE: Audiobahn A2002J Intake Amplifiers feature

an on-board cobalt blue digital volt meter which allows a quick assessment of your vehicle’s charging voltage to the amplifier. During normal operation, the display should read between 11.5V and 14.4V. A LO or HI readout indicates a problem that requires attention.

AIR INTAKE FAN: Audiobahn’s Intake Series of amplifiers were made to be ultra-durable and allow for installation versatility. Since heat weakens the inner workings of any electrical component, attention was put into the placement of the air-induction groove and air intake fan. These design components help force cooler outside air into the chassis of the amplifier and help to maintain its optimum operating temperature.

NICKEL-PLATED BLOCK TERMINALS: Audiobahn uses nickel-plated block terminals to ensure increased productivity and maintaining proper connection. Because nickel is an ideal electrical conductor, the flow of power is essential in maintaining proper current flow through power connections. The nickel-plated block terminals provide a more efficient power transfer from output terminals to speakers and subwoofers and make a more solid and secure connection for all wires. Each terminal block is also encased in black ABS plastic to prevent short circuits and accidental wire entanglement.

  • NEW AUDIOBAHN A2002J 300 WATT 2 Channel A/B Car Amplifier
  • RMS Power Stereo :
    • 75 Watt x 2 Channel @ 4 Ohm
    • 100 Watt x 2 Channel @ 2 Ohm
    • 300 Watt x 1 Channel @ 4 Ohm Mono
  • Class A/B MOSFET Circuitry
  • PWM MOSFET Power Supply
  • double-sided Glass Epoxy Circuit Board
  • THD: 0.02%
  • S/N Ratio: >100dB (+/- 1dB )
  • Frequency Response:10Hz - 40kHz
  • Input Sensitivity: 200mV ~ 8V
  • Variable 18dB Hi-pas Cross over: 50Hz - 750Hz
  • Variable 18dB Low-pass Cross over: 50Hz - 120Hz
  • Bass boost on / off
  • Subsonic Filter: 20Hz - 50Hz
  • RCA Throughput Connections
  • 3-way Protection Circuitry: Therma l, Short Circuit and Overload Cooling Fan
  • Cobalt Blue Illumination
  • High Gloss Chrome-Plated Finish
  • RCA and HIGH Level Inputs
  • Dimensions: 2-1/2" H x 11-15/16" W x 6-13/16" L
  • Part Number: A2002J
  • Product Condition: BRAND NEW
  • 1 Year Manufacturer Warranty
  • Amp Kit:
  • New VM Audio SRPK8R 8 Gauge Amplifier Complete Wiring Kit
  • Complete amplifier wiring kit with cables, connectors and accessories
  • 8 Gauge high currrent power cables with 294 multi stranded bare copper
  • 8 Gauge high currrent ground cables with 294 multi stranded bare copper
  • E.M.I isolated RCA audio cables with maximum surface contact connection and exclusive VM audio barrel grip
  • Nickel plated, high impact resistant 50 AGU fuse holder with exclusive 8 Gauge maximum wire to surface current flow directivity
  • 8 Gauge nickel plated power/ground solderless ring crimp terminals
  • 8 Gauge nickel plated power/ground solderless spade crimp terminals
  • Element protection power cable loom jacket
  • High quality insulated solder-less crimp butt terminals
  • Durable high strenght nylon tie wraps
  • Kit includes:
    • 17 Ft red 8 gauge power wire
    • 3 ft black 8 gauge ground wire
    • 17 ft high performance RCA wire with 18 gauge remote wire
    • 8 Gauge In-line AGU fuseholder
    • 50 Amp AGU fuse
    • Split Loom Tubing
    • 10) 6" wire ties
    • Installation Hardware
  • Product Condition: Brand New
  • Part Number: SRPK8R
  • 1 Year Manufacturer Warranty
No reviews here yet. Be the first to write a review!
Have a question that's not answered here? Ask our team of product experts!
This will be visible to our community
We'll use this to email you a response. We won't make this public. See our Privacy Policy