VM Audio EXA3000.2 3000W 2 Channel Amplifier (2 Pack) : VM-EXA3000.2
ALL ORDERS PLACED BEFORE 2PM CST SHIP THE SAME DAY - FAST & FREE SHIPPING EVERY DAY
Vehicle Fitment Guide
Year Make Model

VM Audio EXA3000.2 3000W 2 Channel Amplifier (2 Pack)

(No reviews - Be the first to review!)
SKU: VM-EXA3000.2
Brand: VM Audio
Condition: New
This item is currently unavailable. Notify me when it's back in stock.

VM Audio EXA300.2 2 Channel Amplifier

Class A/B 1/2 Channel 1000W Power Amplifier The most advanced and innovative technologies with meticulous design and engineering give the Elux Fidelity Class A/B Power Amplifier a level of sophistication like no other. A/B Topology ensures crystal clear sound, separating positive and negative signals with incredibly accurate precision. Our V-MOSFET engine provides high-powered, dynamic headroom with little heat or distortion. Fast acting DC-DC power conversion creates stable DC voltages in a more efficient manner. The Self-Guard Five-Way Protection guards against overheating, short-circuiting, over-current and under-voltage.


Our Elux Series Fidelity Class A/B Power Amplifiers not only boost the level of sound decibels, but more importantly, boost the quality of listening experience. Experience the difference in power and clarity in your music with VM Audio’s Elux Series Fidelity Class A/B Power Amplifiers.

  • ALUMINUM / DIECAST HEATSINK DESIGN

The aluminum outer case provides a heatsink which helps to dissipate heat. The aluminum outer case maintains a safe temperature, pylling heat from the interior at the prolonged, louder volumes. Vertical diecast fins increase heat

  • HIGH-GRADE COMPONENTS Our Elux Amplifiers feature a doubled sided PCB board, V-Mosfets, TFY capacitors and an efficient power supply—the highest quality electronics for the purest signal. These components will ensure that the amplifiers will handle extreme amounts of power with long-lasting durability.
  • FIDELITY CLASS A/B CIRCUITRY

The Fidelity Class A/B Circuitry delivers precise half-signal transitions with low heat generation. Signals are reproduced separately and joined together to complete the full signal.

  • V-MOFSET LOW DISTORTION OUTPUT STAGE

The Output stage provides consistent, stable, high-powered and dynamic headroom with less heat and distortion. This allows for high-switching speed as well as more efficient signal response.

  • HIGHLIGHTS
  • 2/1 Channel Power Car Amplifier
  • Fidelity Class A/B
  • High-Cycle DC-to-DC PWM MOSFET Power Supply
  • Noise Reduction Single Star Ground System
  • Discrete Buffered Unbalanced Input Stage
  • Onboard Multi-Stage Low Noise Signal Processing
  • Low Distortion Fidelity MOSFET Output Stage
  • Active Second Order High/Low Crossover Filters
  • Soft-Power Dedicated Turn-On Circuit
  • SelfGuard Protection: Thermal, Short-Circuit, Over-Current, Over-Voltage, and Under-Voltage.
  • Direct Line Level Stereo Outputs
  • Adjustable Input Signal Gain Control
  • Continuous Variable Bass Boost Gain
  • Low Noise Manual Crossover Switch
  • Independent Adjustable Lowpass Filter
  • Independent Adjustable Highpass Filter
  • Power and Protection LED Indicator
  • Nickel-Plated Brass Block Speaker and Power Terminals
  • TECHNICAL SPECIFICATIONS
  • Type: Mosfet
  • Channels: 2
  • Total Power 3000W
  • RMS Power @ 4 Ohm: 750Wx2
  • Peak Power @ 2 Ohm: 1500Wx2
  • Peak Power @ 4 Ohm Bridged: 3000Wx1
  • Minimum Impedance Unbridged: 2
  • Minimum Impedance Bridged: 4
  • Frequency Response: 20Hz-20kHz
  • Single to Noise Ratio: 93dB
  • Circuit Type: A/B
  • Protection Circuit: 5 Way
  • Low/Highpass Crossover: 50Hz-250Hz
  • Preamp Outputs: 1 Pair
  • Bass Boost: 0dB-12db
  • Bass/Gain Remote: NA
  • Power Indicator: Yes
  • Terminals: Nickel Plated
  • Power /Ground Connection: 4 Gauge
  • Input Voltage: 14.4V
  • Fuse: 2x40A
  • Dimensions: 15.51"L x 9.65" W x 2.17" H
  • Warranty: 1 Year
  • Quantity: 2
No reviews here yet. Be the first to write a review!