Rain Bird 100PGA 1-Inch Inlet Inline Irrigation Valve (10 Pack) : 10 x 100PGA

Rain Bird 100PGA 1-Inch Inlet Inline Irrigation Valve (10 Pack)

(No reviews - Be the first to review!)
SKU: 10 x 100PGA
Brand: Rain Bird
Condition: New
This item is currently unavailable. Notify me when it's back in stock.

Trust your sprinklers will run efficiently when you use top of the line parts to replace your existing system and choose Rain Bird's 100PGA Inlet Inline Irrigation Valve.

The PGA valve maintains a strong, water-tight seal between the body and bonnet, no matter the conditions. Even in extreme temperatures the PGA valve had no leaks. Built for high-end residential and light commercial applications, it overcomes the intense water pressure surges found on many commercial sites.

Rain Bird PGA series valves are the toughest in their class, so have peace of mind as your water sprinkler does the hard work for you.

  • Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions
  • Robust electrical and PVC design provides increased durability and reduces noise
  • Normally closed, forward flow design
  • Filtered pilot flow to resist debris and clogging
  • Slow closing to prevent water hammer and subsequent system damage
  • Globe and angle configuration for flexibility in design and installation
  • Manual internal bleed operates the valve without allowing water into the valve box allowing the pressure regulator to be adjusted without turning the valve on at the controller
  • 1-piece solenoid design with captured plunger and spring for easy servicing and prevents loss of parts during field service
  • Non-rising flow control handle adjusts water flow as needed
  • Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance
  • Accepts latching solenoid for use with Rain Bird battery-operated controllers
  • Recommended for high-end residential and light commercial applications
  • Optional purple flow control handle for non-potable water
  • Specifications:
    • Valve size: 1-inch
    • Valve type: Inline
    • Material: Plastic
    • Valve inlet and outlet configuration: NPT female x NPT female threaded
    • Valve options: Multi-drive screws, Non-potable
    • Valve series: PGA
    • Operating temperature: Up to 110 degrees Fahrenheit
    • Electrical specifications: 24 VAC 50/60 Hz (cycles per second) solenoid
    • Inrush current: 0.41A (9.9VA)
    • Holding current: 0.14A (3.43VA)
    • Coil resistance: 30-39 Ohms
    • Flow Range: Flow without PRS-D option: 2 to 150 GPM (0,5 to 34 m3/h; 0,13 to 9,44 l/s); Flow with PRS-D option: 5 to 150 GPM (1 to 34 m3/h; 0,32 to 9,44 l/s)
    • Operating Pressure 15 to 150 psi (1,0 to 10,4 bar)
  • Dimensions (L x W x H): 7.25 x 5.5 x 3.25 inches
  • Quantity: 10
No reviews here yet. Be the first to write a review!