Polk Audio PAD2000.2 500-Watt 2-Channel Class D Amplifier
ALL ORDERS PLACED BEFORE 2PM CST SHIP THE SAME DAY - FAST & FREE SHIPPING EVERY DAY
Vehicle Fitment Guide
Year Make Model

Polk Audio PAD2000.2 500-Watt 2-Channel Class D Amplifier

$79.99
Was $111.99 You save $32.00!
(2 Reviews)
SKU: PAD2000.2
Brand: Polk Audio
Condition: New
This item is currently unavailable. Notify me when it's back in stock.

Put some serious amplification at the helm of your car audio setup before you hit the road this season with the Polk Audio PAD2000.2 500-Watt 2-Channel Class D Amplifier.

This Polk Audio 2-channel amplifier is an incredibly sleek Class D mobile audio amp with toroidal transformers that make it run cleanly and efficiently in just a 2-inch tall package. This amp can bridge a left and right terminal into a single full range channel with a huge power output. Try the 2 full-range channels or a bridged subwoofer channel hookup mode.

Don't worry, your amp won't be shocked or shorted. It comes with thermal, DC offset, reverse DC voltage, and short circuit protection for peace-of-mind. It's also constructed with stainless steel hardware that won't corrode in humid conditions.

Get an amp that's sleek and compact but has plenty of power and crossover features with the Polk PAD2000.2.

  • Super efficient Class D bridgeable 2-channel mobile audio amplifier
  • Capable of bridging a left and right terminal into a single full-range channel with a higher power output
  • The L /R channels increase the output power from 125 watts to 500 watts per channel
  • Most common hookups are 2 full range channels or a bridged subwoofer channel
  • Runs cooler than conventional amps
  • High speed MOSFET switching power supply
  • Toroidal transformers - sleek and efficient design
  • Protection - thermal, DC offset, reverse DC voltage, and short circuit protection
  • FULL, HPF, BPF switch - selects full-range, high pass filter, or bandpass filter for dialing in your crossover for the ideal speaker blending
  • Adjustable low and high pass frequency range - fine tune tour speakers in their frequency range overlap
  • Level control - adjusts the gain of the left and right channels to match the output voltage from your head unit
  • Line level inputs - accepts line level input from a head unit, preamplifier, or equalizer
  • Line level outputs - provides a full range signal for easy connection to additional amplifiers
  • Nickel plated wire terminals and RCA connectors - ensure maximum signal transfer
  • Stainless steel hardware - used throughout and won’t corrode in humid conditions
  • Specifications:
    • RMS power at 14.4V watts per channel bridged 4 ohms: 500 watts
    • RMS power at 14.4V watts per channel NOT bridged at 1 kHz 2 ohms: 250 watts
    • RMS power at 14.4V watts per channel NOT bridged at 1 kHz 4 ohms: 125 watts
    • 12V and ground cable gauge: 4 AWG
    • Distortion at rated power: <0.1%
    • Effective damping factor: >100
    • Maximum sensitivity: 200 mV-6V dB
    • Minimum impedance bridged: 4 ohms
    • Minimum impedance not bridged: 2 ohms
    • Signal to noise: 105 dB
    • Total frequency response: 20 Hz-20 kHz
    • High pass filter frequency: 20 Hz-4 kHz
    • High pass filter slope: 12 dB/octave
    • Low pass filter frequency: 50 Hz-5 kHz
  • Color: Black
  • Dimensions (L x W x H): 6.75 x 8.25 x 1.75 inches
  • Weight: 3.75 pounds
  • Manufacturer warranty: 90-day warranty
Written by from Modesto on Apr 7, 2019 Verified Buyer
Great amp
Great amp plenty of power.
Would I recommend this to a friend or family member? Yes
Pros
  • Looks Good
  • Quality Construction
Is this review helpful?      
Written by from Ghettysburg on Apr 20, 2019
Loud and clear little amp
I bought two of these from vminnov. for just over 100 bucks and am thinking about buying one more in case one dies. One runs my front speakers and the other my rear in my truc and these little amps are powerful, These little amps have never caused me an issue. One thing I dislike about them is the x10 buttons on the amp controls. I have a JL Audio 300/2 amp that i replaced with this little guy mainly because the JL is too big and I already have no space in my truck. I can't tell a difference in sound wth that am pversus this one and they claim the 300/2 is one of the best amps for sound quality. In fact, I am not sure why but I prefer the sound of the Polk amps. I love the way these amps have nice inputs for your speaker wire and power/ground/remote wires. At this price point, it's a must buy if you need a relatively high wattage 2 channel small amp for coaxial or component speakers, or perhaps one sub.
Would I recommend this to a friend or family member? Yes
Is this review helpful?